The p0.9 led screen manufacturer will show you the following five common installation methods of led display:

Mosaic installation: suitable for indoor screens with small area. Due to the small installation space, in order not to take up space, the same size of area is dug out on the wall according to the size of the screen, and the LED display is embedded in the wall. The p0.9 led screen manufacturer tells you that the wall is required to be a solid wall. The cost of pre-maintenance is higher.
Hanging installation: It is mostly suitable for large-scale places such as station LED electronic display screens and airport LED electronic display screens to play the role of indicating signs. The screen area is required to be small (below 10 square meters), and it is required to have a suitable installation location, such as a beam or a lintel above, and the screen generally needs to be covered with a back cover.
Wall-mounted installation: p0.9 led screen manufacturers tell you that it is mostly suitable for indoor led display installation, with a small area (below 10 square meters), the wall is required to be a solid wall, and hollow bricks or simple partition walls are not suitable for this. installation method.
Roof-mounted installation: p0.9 led screen manufacturers tell you that it is mainly suitable for outdoor advertising led electronic display screens. The installation site is mainly on the roof of buildings. As the height of the building increases, the windproof level to be considered also increases.
Column type installation: p0.9 led screen manufacturers tell you that it is mostly used for the installation of outdoor advertising led display screens, with a wide field of view and relatively open areas around, such as squares, parking lots, etc. According to the size of the screen area, it can be divided into single-column and double-column installation.