p0.9 The LED display manufacturer tells you that if the LED electronic display is used outdoors, it will face many challenges. The LED display screen will be affected by severe weather such as high temperature, cold wave, strong wind, rain, etc. If these aspects are not done well, the safe operation of the display screen will be impossible to talk about. Today, the p0.9 led display manufacturer will tell you how to install the LED electronic display to prevent water leakage.

1. Add sealant on the backboard
The p0.9 led display manufacturer tells you that many friends, in order to save trouble, do not add a backplane or sealant on the backplane when installing an outdoor LED display. After a long period of time, the electronic components will definitely get water, and the LED display will be displayed over time. There will be a problem with the screen. The most feared thing for electronic components is water. Once water enters the circuit, it will cause the circuit to burn out. These problems that can be solved at hand must not be ignored.
2. Hit the leak
p0.9 The led display manufacturer tells you that if the LED electronic display and the back panel are tightly integrated, the water leakage must be made underneath; the so-called water leakage is for water leakage. p0.9 The led display manufacturer tells you that no matter how tight the front and back of the LED display are combined, there will still be more or less water in it over the years. If there is no leaking hole in the lower mouth, the water will accumulate over time. If the leaking hole is punched, the water will flow away, which can play a very good waterproof effect, and it is also good for prolonging the service life of the LED display.
3. Appropriate line
p0.9 The LED display manufacturer tells you that when installing the LED electronic display, you must use the appropriate wire for the plug connection. Generally, follow the principle of large and not small, that is, calculate the total wattage of the LED display and use a slightly larger wire. p0.9 The manufacturer of led display tells you that it is best not to use wires that are just right or too small. This will easily cause the circuit to burn out and affect the safe operation of the LED display.
The above is the p0.9 led display manufacturer's summary of how to install the LED display to prevent water leakage. I hope that it can be a reference for the majority of friends when installing the display.